Terms of Service
Effective date: September 28, 2026 · Last updated: November 16, 2026
1. Agreement
By using zenithquoting.com or by sending us a blueprint to obtain a quote, you agree to these Terms of Service. If you do not agree, please do not use the service. "Zenith," "we," "us," and "our" mean Zenith Quoting LLC, an Ohio limited liability company based in Chagrin Falls, Ohio.
2. What we do
Zenith is a concierge estimation service. You send a 2D blueprint or RFQ by email or upload it to the Zenith Tool at app.zenithquoting.com, our software (including AI-based parsing and pricing) analyzes it, and we return an itemized quote or estimate. On the Zenith Quoting Desk, you email us your RFQ prints and we price each one in your shop's own account in the Zenith Tool, on your shop's machines and rates. A person checks every line before the quote goes back to you, and you decide whether to send it to your customer under your own name. We never contact your customers. We are not a machine shop and do not manufacture parts; we produce estimates to help you quote.
What counts as a "print." One print means one single part-component drawing page, so a 10-page assembly package counts as 10 prints. Your first 10 prints are free, and this count is also how the prints included in a monthly plan are measured. Packages of more than 25 sheets in one submission are priced by hand and take longer.
What we charge. Your first 10 prints are free while we learn your shop's rates. You can start with a calibration pilot: you send a few prints you have already quoted, with your price or your shop rates, and we return our quote for each beside yours. After your first 10 prints, the service is $15 for each print we quote, and the total for one monthly billing period is never more than $299. There is no contract and no minimum. No charge starts until you agree to it in writing. Paid service, including any extra prints, is billed by monthly invoice. You can cancel at any time by emailing us, and you will not be billed for any month after the one in which you cancel.
3. Estimates are for reference only
Every quote, price, and figure we provide is an estimate for reference only. It is generated by automated analysis of the drawing you send and may contain errors or omissions. It is not a binding offer, a guaranteed price, an engineering opinion, or a substitute for your own review. Before you rely on any number, and before you submit a bid to your customer, you must independently verify all dimensions, materials, tolerances, quantities, setups, and pricing. You are solely responsible for the quotes and bids you issue to your own customers.
4. Your responsibilities
- Provide accurate, complete information so we can estimate correctly.
- Only send drawings you own or are authorized to share. Do not send a third party's confidential or proprietary drawings without their permission.
- Do not send drawings marked CUI, ITAR, export controlled, or with a DoD Distribution Statement B through F. Our software checks each print for these markings and holds any it finds, but you remain responsible for your own export compliance and for your customer's rules on where its drawings may be sent. A print marked only EAR99 is read only after your shop agrees to it in writing.
- Review and verify every estimate before using it.
- Use the service only for lawful business purposes.
5. Confidentiality
We treat the drawings and specifications you send as confidential and use them only to prepare your estimate, as described in our Privacy Policy. In turn, our quotes, methods, pricing logic, and any materials we share with you are our confidential information and may not be resold, republished, or used to build a competing service.
6. Free quoting and promotional offers
Introductory offers (such as the first 10 free prints and the founding-shop rate) are provided at our discretion, may be limited in number or time, and may be changed or withdrawn at any time. Offers are for legitimate business prospects and may not be abused. Changing or withdrawing an offer never changes a price your shop has already agreed to in writing.
6A. Custom shop tools
What it is. On request, we build a software tool for one task in your shop, such as tracking jobs, saving setup notes, or entering a job from a purchase order. Before any work starts, we agree with you in writing on what the tool will do and what it costs.
Build price. The build price is $499 for one tool unless we agree on a different price in writing. You try the tool on your own work first. You owe the build price only after you confirm in writing that the tool does the agreed task. If you do not accept the tool, you owe nothing and you stop using it.
Monthly service. A tool that runs on our systems needs our monthly service, which is $99 a month unless we agree otherwise in writing. It covers running the tool and small changes. It starts when you accept the tool and is billed through Stripe. You can cancel at any time by telling us, and you will not be billed for any month after the one in which you cancel. When the service ends, the tool stops running at the end of the last paid month, and before then we send you a full copy of your data.
If we stop. If we ever stop offering the service, we give you a copy of your tool and your data, with written instructions, so you can keep running it on your own systems.
Fixes. For 30 days after you accept a tool, we fix problems with the agreed task at no extra charge. New features are a separate job.
Your data and our software. The information you give us to build and run your tool stays yours, and Section 5 (Confidentiality) applies to it. We keep all rights to the software we write. You may use your tool in your own shop while your monthly service is active, and without that limit if we give you a copy under "If we stop."
Check the results. A tool helps your people do a task. It does not replace their judgment. Sections 3, 8 and 9 apply to custom tools the same way they apply to quotes.
Controlled information. Do not give us ITAR, EAR or other export-controlled information unless we have agreed in writing that the tool will run only on your own systems.
6B. Refunds
You pay the build price for a custom tool only after you accept it, so there is nothing to refund before then. If, within 30 days after you accept a tool, it stops doing the agreed task and we cannot fix it, we refund the build price. Monthly fees already paid are not refunded, but you can cancel at any time and you will not be billed again. Quoting charges are covered by Sections 2 and 6.
7. Intellectual property
The Zenith Quoting name, website, content, and estimation engine are owned by us and protected by applicable law. You keep all rights to the drawings you send us. We keep all rights to the software and to the format and methodology of the quotes we produce.
8. No warranty
The website and service are provided "as is" and "as available," without warranties of any kind, express or implied, including any implied warranties of merchantability, fitness for a particular purpose, accuracy, or non-infringement. We do not warrant that estimates will be error-free, that the service will be uninterrupted, or that any result will meet your requirements.
9. Limitation of liability
To the fullest extent permitted by law, Zenith Quoting and Malik Carey will not be liable for any indirect, incidental, special, consequential, or punitive damages, or for any lost profits, lost business, or losses arising from your reliance on an estimate. Our total liability for any claim relating to the service will not exceed the amount you paid us for the service in the twelve months before the claim arose (which may be zero during the free period).
10. Indemnification
You agree to indemnify and hold harmless Zenith Quoting and Malik Carey from claims, losses, and expenses arising out of your use of the service, the bids or quotes you issue to your customers, or your violation of these terms or of any third party's rights (including sending drawings you were not authorized to share).
11. Declining or ending service
We may decline, suspend, or discontinue service to anyone at any time, including for misuse, abuse of promotional offers, or any conduct we reasonably consider harmful. You may stop using the service at any time.
12. Governing law
These terms are governed by the laws of the State of Ohio, without regard to its conflict-of-laws rules. Any dispute will be handled in the state or federal courts located in Cuyahoga County, Ohio, and you consent to that jurisdiction.
13. Changes to these terms
We may update these terms from time to time. The "Last updated" date above will change when we do. Continued use of the service after an update means you accept the revised terms. If a change raises what a paying shop is charged, we will email you at least 30 days before it applies to you.
14. Contact
Questions about these terms: malik@zenithquoting.com · Zenith Quoting, 46 Shopping Plaza #1010, Chagrin Falls, OH 44022.